Drwaing 101 To 200
Created on 15th August 2025
13 plays
109 Questions
No Description
Questions (109)
1. In a civil engineering drawing, what does a "Centre line" denoted ?
The middle axis of a component or structure
4 choice options
2. What is the show in a "hvac a plan" ?
The layout of heating, ventilation, and air conditioning systems
4 choice options
3. What does "F.F.C" refer to in civil engineering drawings?
Finished floor elevation
4 choice options
4. Which drawing is used to show the detailed construction of staircases ?
Detail Drawing
4 choice options
5. What does the abbreviation "P.V.C" stand for in civil engineering drawings ?
Polyvinyl Chloride
4 choice options
6. In civil engineering drawings, what is the purpose of "reference markers"?
To indicate specific locations or sections within the drawing
4 choice options
7. In civil engineering drawings, what does a dashed line typically represent ?
Hidden or non-visible elements
4 choice options
8. Which type of drawing provides a view of a building or structure from above ?
Floor plan
4 choice options
9. What does the abbreviation "R.O.W" stand for in civil engineering drawings ?
Right of way
4 choice options
10. What is the represented by "sectional hatching" in civil engineering drawings ?
Different types of materials are construction methods
4 choice options
11. In a civil engineering drawing, what does the term "beam" refer to ?
A horizontal structural element that supports loads
4 choice options
12. Which drawing type shows the intersection of two or more elements of a building ?
Section view
4 choice options
13. What does "M.H" stand for in civil engineering drawings ?
Manhole
4 choice options
14. Which line type is used to indicate the centre of circles or arcs ?
Center line
4 choice options
15. What does the abbreviation "S.O.P" stand for in civil engineering drawings ?
Structural opening plan
4 choice options
16. What is the purpose of "grid lines" in civil engineering drawings ?
To provide a reference system for locating elements
4 choice options
17. What does the term "dead load" refer to in civil engineering drawings ?
The static load of the structure itself
4 choice options
18. What does the term "contour" refer to in site plan ?
Lines representing elevations
4 choice options
19. Which drawing is typically used to illustrate the location of utility lines ?
Utility plan
4 choice options
20. What does "L.L." stand for in civil engineering drawings ?
Live Load
4 choice options
21. In civil engineering drawings, what does "E.W." refer to ?
Exterior wall
4 choice options
22. Which drawing shows a cutaway view through a building to show internal features ?
Section view
4 choice options
23. What does the term "sub-grade" refer to in civil engineering drawings ?
The layer of soil beneath the foundation
4 choice options
24. What is the represented by "line weight" in civil engineering drawings ?
The thickness of lines used to indicate different elements
4 choice options
25. What does the abbreviation "P.T." stand for in civil engineering drawings ?
Post tensioned
4 choice options
26. Which type of drawing provides detailed information on stair designs ?
Detail drawing
4 choice options
27. In civil engineering drawings, what does "T.O.S." refer to ?
Top of Steel
4 choice options
28. What is the function of "construction notes" in civil engineering drawings ?
To provide instructions and details for the construction process
4 choice options
29. Which drawing typically shows the layout of rooms and their dimensions ?
Floor plan
4 choice options
30. What does the term "site plan" generally include ?
The layout of the site, including buildings, landscaping, and utilities
4 choice options
31. In civil engineering drawings, what does the abbreviation "H.C" stand for ?
Handicapped access
4 choice options
32. Which drawing would you use to find the locations of the Fire extinguisher and emergency exist ?
Safety plan
4 choice options
33. What does "G.F.B" stand for in civil engineering drawings ?
Ground floor beam
4 choice options
34. In civil engineering drawings, what does the term "scaling" refer to ?
The process of converting measurements to a smaller or larger size
4 choice options
35. What does "P.D" typically refer to in civil engineering drawings ?
Property drainage
4 choice options
36. Which drawing shows the layout of structural elements such as columns and beams ?
Structural plan
4 choice options
37. What does the abbreviation "S.P" stand for in civil engineering drawings ?
Site Plan
4 choice options
38. In civil engineering drawings, what is the purpose of "notations" ?
To provide additional information or explanations about the drawing
4 choice options
39. Which Drwaing type is used to show the layout and design of Drainage systems ?
Drainage plan
4 choice options
40. In a civil engineering drawing, what does a "Section view" provide ?
A Cross-Sectional cut through the structure
4 choice options
41. What does the abbreviation "A.B." typically refer to in civil engineering drawings?
Anchor Bolt
4 choice options
42. In civil engineering Drawings, what does "B.O" Stand for ?
Bottom of
4 choice options
43. What is typically shown in a "Land Survey" Drawing ?
The topography and boundaries of a land parcel
4 choice options
44. Which drawing provides information on the alignment and placement of roadways?
Road plan
4 choice options
45. What does the abbreviation "S.W" stand for in civil engineering drawings ?
Storm water
4 choice options
46. In civil engineering drawings, what does "T.O.P" refer to ?
Top of plate
4 choice options
47. Which type of drawing is used to detail the placement and layout of plumbing fixtures?
Plumbing plan
4 choice options
48. What does the abbreviation "W.P". refer to in civil engineering drawings?
Water proof
4 choice options
49. What is the purpose of "cut sections" in civil engineering drawings ?
To show the interior structure or details of a building
4 choice options
50. Which type of drawing shows the location and layout of exterior features such as landscaping and hardscaping?
Landscape plan
4 choice options
51. What is the default unit of measurement in AUTOCAD ?
Inches
4 choice options
52. How can you view different layers in AUTOCAD ?
Through the Layer properties Manager
4 choice options
53. Which command is used to create a 3D soild object ?
All of the Above
4 choice options
54. How do you access the 'options' dialog box in AutoCAD ?
By typing OPTIONS
4 choice options
55. Which tool allows you to precisely place objects in AutoCAD ?
Object snap (OSNAP
4 choice options
56. What does the 'ARRAY' Command do ?
Creates multiple copies of an object in a pattern
4 choice options
57. Which command is used to join two or more lines into a polyline ?
JOIN
4 choice options
58. What does the 'MIRROR' Command do in AutoCAD ?
Flips an object over a specified axis
4 choice options
59. Which command is used to measure the distance between two points in AutoCAD ?
DIST
4 choice options
60. How can you quickly switch between different Views in AutoCAD ?
By using the ViewCube
4 choice options
61. Which command is used to remove extra geometry and clean up the drawing ?
PURGE
4 choice options
62. Which command is used to draw a straight line in AutoCad ?
LINE
4 choice options
63. How do you adjust the thickness of a line in AutoCad ?
By adjusting the 'Lineweight' property in the properties palette
4 choice options
64. What is the function of the "HATCH" command ?
To fill an enclosed area with a pattern
4 choice options
65. Which command allows you to create a new layer in AutoCaD ?
LAYER
4 choice options
66. How do you save your current drawing in AutoCAD?
All of the Above
4 choice options
67. Which command is used to make a copy of an object at a specific distance ?
COPY
4 choice options
68. What does the 'ROTATE' command do?
turns an object around a base point
4 choice options
69. How do you display the properties of a selected object ?
By using the 'properties' palette
4 choice options
70. Which command is used to create a new drawing ?
NEW
4 choice options
71. What does the 'XLINE' command create in AutoCAD?
An infinity line
4 choice options
72. Which command is used to modify the size of a drawing object ?
SCALE
4 choice options
73. What does the 'TRIM' command do in AutoCAD ?
Cut Objects
4 choice options
74. What does the 'FILLET' command do in AutoCAD?
Rounds the corners of an object
4 choice options
75. Which command is used to create a dimension in AutoCAD ?
DIMLINEAR
4 choice options
76. How do you set a specific co-ordinate system for your drawing ?
By adjusting the SNAP settings
4 choice options
77. How do you activate the 'pan' tool in AutoCAD ?
By pressing the mouse wheel
4 choice options
78. What does the 'OFFSET' command do in AutoCAD?
Duplicates objects at a specified distance
4 choice options
79. Which command is used to create a circle in AutoCAD ?
CIRCLE
4 choice options
80. What is the purpose of the 'BLOCK' command in AutoCAD ?
To create a Reusable set of objects
4 choice options
81. Which command is used to change the layer properties ?
LAYER
4 choice options
82. What does the 'EXPLODE' command do in AutoCAD?
Break down a block into its component parts
4 choice options
83. In a technical drawing, which line type is typically used to visible edges ?
Visible line
4 choice options
84. Ine Orthographic projection, how many views are typically used to represent a 3D object completely ?
3
4 choice options
85. In technical drawing, what does a 'reference dimension' indicate ?
A dimension used for reference proposes only and not for manufacturing
4 choice options
86. In which type of drawing is the object's features drawn at full scale and other features are drawn in a reduced size ?
Detail drawing
4 choice options
87. What does the 'scale factor' in a drawing represent ?
The proportion of the drawing size to actual size
4 choice options
88. What does the term 'datum' refer to in engineering drawing ?
A reference point or surface from which measurements are made
4 choice options
89. What does the term 'scale' refer to in engineering drawings?
The proportion of the drawing to the actual object
4 choice options
90. What does the term 'toleranancing' refer to in Engineering drawings ?
The permissible limit of variation in dimension
4 choice options
91. What is a 'bill of materials' in an engineering drawings ?
A list of all the components required for manufacturing
4 choice options
92. What is the 'cutting plane line' in section view ?
A line indicating where the object has been cut to show internal features
4 choice options
93. What is a "hidden line" in engineering drawing ?
A line that represents edges not visible in the current view
4 choice options
94. What is the "exploded view" in an engineering drawing ?
A view showing the object disassembled into its components
4 choice options
95. What is the function of "leader lines" in an engineering drawing ?
To connect a dimension or note to a specific feature of the drawing
4 choice options
96. What is the main difference between a 'section view' and a 'detailed view' ?
A Section view shows internal features by cutting through the object, while a detail view shows a magnified portion of the drawing.
4 choice options
97. What is the primary purpose of An engineering drawing ?
To communicate technical information
4 choice options
98. What is the purpose of a section view in an engineering drawing ?
To show internal features of component
4 choice options
99. What is the purpose of a title block on an engineering drawing ?
To provide information about the drawing, such as title, scale, and date
4 choice options
100. What is the purpose of dimensioning in an engineering drawing ?
To provide measurements and sizes of components
4 choice options
101. What is the purpose of the using "hatching" in a section view ?
To indicate the material and texture of the sectioned area
4 choice options
102. What is the standard angle for drawing an isometric view in engineering drawing ?
30 Degree
4 choice options
103. Which drawing view is used to show the width and death of an object ?
Side view
4 choice options
104. Which line type is used to represent the centre line of an object ?
Chain line
4 choice options
105. Which line type is used to show dimensions and their locations in Engineering drawings ?
Dimension line
4 choice options
106. Which type of drawing is used to show the relationship between parts in an assembly ?
Assembly Drwaing
4 choice options
107. Which type of line is used to show dimension in a drawing ?
Dimension line
4 choice options
108. Which type of projection is commonly used in engineering drawings for a three dimensional view ?
Isometric projection
4 choice options
109. Which view is typically used to show the height and width of an object in orthographic projection ?
Front view
4 choice options