R,B & B 301 To 400
Created on 24th July 2025
14 plays
100 Questions
No Description
Questions (100)
1. Choose correct option related to conditions stairs.......
All
4 choice options
2. Lean to roof is suitable for maximum span of.....
2.5 m
4 choice options
3. For Bathrooms and WC of residential buildings,......... are generally used
Louvered window
4 choice options
4. In public buildings, the minimum area of Windows should be................% of floor area
20 %
4 choice options
5. The width of internal door for a residential building shall be
0.9 m To 1.1 m
4 choice options
6. The width of door should be such that
Two persons can pass through it walking shoulder to shoulder
4 choice options
7. The solid substance in a form of fine powder, forming the bulk of a paint is called
Base
4 choice options
8. The use of vehicle or career in a paint is
To hold the different ingredients in liquid suspension
4 choice options
9. D.P.C. in a building stands for
Damp proof course
4 choice options
10. Expansion joint in RCC framed structure in a building is required where length is more than
30 m
4 choice options
11. The unit of measurement of pointing is
Square metre
4 choice options
12. Sand faced plaster is generally applied on
External face of external walls
4 choice options
13. The rates of various items in the DSR shall be increased by.......... while framing estimate of a building in Central Jail area located in corporation area.
15 %
4 choice options
14. The unit of measurement of general pest control services to the building to control nuisance of insect is.........
Square metre
4 choice options
15. The quantity of water required per bag of cement to prepare a concrete having W-C ratio = 0.6 is
30 litre
4 choice options
16. What is the maximum permissible silt content in sand used for concrete
4% by weight
4 choice options
17. Water requirement of domestic purpose is
135 litre / Day /Head
4 choice options
18. Horizontal projections of the head and sill of frame to fix frame on the wall openings is called as
Horn
4 choice options
19. Which of the following door as "Drum"
Rolling Steel shutter doors
4 choice options
20. A Door which provided entrance to one and exist to other person simultaneously and closes automatically when not in use is......
Revolving doors
4 choice options
21. Anti- termite treatment can be divided into two categories
Post- construction treatment and pre -construction treatment
4 choice options
22. As per I.S 456 /2000 concrete of grade........ and above up to grade........ are called standard concrete.
M-25, M-55
4 choice options
23. In a slum test each layer of concrete is tamped with......... strokes of the Rounded end of the tamping rod.
25
4 choice options
24. In septic tank........
Outlet pipe is kept about 15 cm lower than the inlet pipe
4 choice options
25. Ine Maharashtra road development plan now is force is.......
Road development plan 2001- 2021
4 choice options
26. "IRC" stand for.......
Indian roads Congress
4 choice options
27. Arrange stage of Engineering Surveys in chronological order
Map study, Reconnaissance preliminary Surveys, detailed survey
4 choice options
28. A Terrain is classified as plain rolling etc. based on......
Cross Slope
4 choice options
29. Capacity of two Lane Road (7.0 M carriageway) is
10000 PCU per Day
4 choice options
30. In plane Terrain, Design speed of SH is...... and for NH is...........
100 kmph, 100 kmph
4 choice options
31. Rulling gradient is
1:30 For VR, ODR, MDR, and SH
4 choice options
32. One and half Lane Road has carriageway width of......
5.50 m
4 choice options
33. Rate of spraying of bitumen for tack coat on BT surface is......
50 kg per 100 sq.m area
4 choice options
34. Super elevation is provided........
To counteract centrifugal force on curved Road
4 choice options
35. Super elevation shall not be more than........ in plane terrain and not more than....... in hilly terrain
7%, 10%
4 choice options
36. In Highway Geometric design SSD means......
Stopping Sight distance
4 choice options
37. IRC has pacified following formula to calculate super elevation
(V×V) / (225 R)
4 choice options
38. Vertical curves are introduced......
At the intersections of different grade
4 choice options
39. Types of vertical curves are.....
Summit Curve and Valley curve
4 choice options
40. "Speed limit" sign is an example of
Regulatory Sign
4 choice options
41. The violation of............ is a legal offence
Regulatory Sign
4 choice options
42. Which sign board will you install well before the start of left turn on a road
Cautionary sign of left hand Curve
4 choice options
43. Center line is Mark on road
To separate the opposite streams of traffic on undivided two way Road
4 choice options
44. Which of the following is NOT a test for road aggregate
Water content test
4 choice options
45. Choose correct pair
Abrasion test Hardness
4 choice options
46. Which test is carried on bituminous mix ?
Extraction test
4 choice options
47. To know the limiting value of temperature, beyond which bitumen should not be heated,............ test is conducted.
Flash point test
4 choice options
48. For design of bituminous mixes....... is used
Marshall Method
4 choice options
49. Stability of bituminous mix..........
Increases upto certain limit and then decreases with increase in bitumen content
4 choice options
50. The temperature of BM mix while laying shall be.......... as per MORTH specification
120 To 160 degree Celsius
4 choice options
51. C.B.R method is used for......
Design of flexible pavements
4 choice options
52. As per IRC recommendations for CBR method of design Lane distribution factor for two Lane single carriageway road is
0.75
4 choice options
53. As per IRC recommendations, for CBR method of design traffic growth rate may be considers as...... if data not available
7.50 %
4 choice options
54. The CBR method of pavement design gives
Total thickness requirement of the Pavement above subgrade.
4 choice options
55. The design CBR for Pavement design Shall be
4 day soaked CBR of remoulded sample
4 choice options
56. As per IRC recommendations per day number of......... is considered for pavement designed by CBR method.
Commercial vehicles of gross weight 3 tonne or more
4 choice options
57. Which of the following pavement composition is recommended if total pavement thickness required is 575 mm for a CBR say 5% ?
25 mm SDBC +50 mm BM +225 WBM +275 GSB
4 choice options
58. Which of the following is an example of rigid Pavement?
Cement concrete pavement
4 choice options
59. What is the true of Dowel bar in CC pavement ?
Half length is bonded in CC slab and remaining is embedded in adjacent slab
3 choice options
60. In CC pavement tie bars are provided....
Across the longitudinal joints of two adjacent slabs
4 choice options
61. For compaction of clay soils........ are used.
Sheeps foot roller
4 choice options
62. In construction of WBM roads, rolling
Start from either edge and gradually shifts towards centre
4 choice options
63. In construction of WBM roads, Rolling
Is done after spreading course aggregate and also after application of binding material & water
4 choice options
64. In construction of WBM road, lateral confinement in from of shoulder......
Is provided before coarse aggregate are spread
4 choice options
65. Soil stabilization is Done to
Improve the stability or bearing power of the soil
4 choice options
66. Before filling pot holes are.......
Cut to rectangular shape and affected material is removed
4 choice options
67. The first priority of road maintenance is.......
To fill potholes
4 choice options
68. Excess bitumen in surface bleeds and surface becomes patchy and slippery the remedial measure is
To spread aggregates of size 10 mm or course sand and roll
4 choice options
69. For a bitumen hungry surface of road,
liquid seal Coat is provided
4 choice options
70. For maintenance of WBM road,
pick and roll method is used
4 choice options
71. Benkelman beam method is used
to design thickness of overlay over a flexible pavement
4 choice options
72. catch water drains are provided.....
to intercept and divert the water from the hill slope
4 choice options
73. Drainage of rain water is important for road.......
In all types of terrains
4 choice options
74. Job mix design refers to.....
Proportioning of aggregates and deciding bitumen content required
4 choice options
75. Crush metal of 25 mm size shall pass 100 % through..... square mesh and 100 % Retain on..... square mesh
40mm, 20mm
4 choice options
76. Riding return is cast Monolithic with.......
Soild Abutment
4 choice options
77. Raft foundation for Bridge is suitable where......
Hard Strata is not available at economical depth
4 choice options
78. A Bridge which never gets overtopped during floods is
High level Bridge
4 choice options
79. For Soild slab Bridge upto span 10 m....... is used
Tar paper bearing
4 choice options
80. For flyovers and ROB....is used as parapet
RCC Anti crash barrier
4 choice options
81. For bridge with raft Foundation, raft slab is underlain by.........
100mm PCC and (900mm sand Granular) filling
4 choice options
82. Width of raft slab is kept equal to
Out-out dimension of pier along current at raft top
4 choice options
83. Clear carriageway width of three Lane Bridge is
11.00 m
4 choice options
84. RCC wearing course is provided on deck of.........
Submersible bridges
4 choice options
85. For bridge of height 8 M with hard Strata at Shallow depth which type of Return is used?
Soild retaining wall
4 choice options
86. Sand is filled in box return because
It can be compacted by hand compaction as roller compaction in box return is not possible
4 choice options
87. Which of the following NOT provided for submersible bridges
Water spouts
4 choice options
88. The foundation of pier abutment of bridge shall be keyed into the hard rock by
0.6 m
4 choice options
89. In inglis formula for calculation of discharge if C = 7000 and A is catchment area in sq. Mile discharge is given in
Cusec
4 choice options
90. O.F.L in Bridge engineering stand for
Ordinary Flood level
4 choice options
91. Soffit of highlevel river bridge is calculated as Soffit level =
Higher of (IHFL or OHFL) + Afflux +Vertical Clearance in m.
4 choice options
92. % Obstruction in highlevel bridges is generally limited to
25 %
4 choice options
93. Expansion joint used for tee Girder Bridge with span more than 10 m but less than 30 m is
Strip seal expansion joint
4 choice options
94. In raft Foundation apron and apron wall are provided
After casting of cut off walls but before casting raft slab
4 choice options
95. Weep Holes in abutment and retaining walls are provided
To Drain out the water from filling behind it
4 choice options
96. In a normal tee Girder Bridge main reinforcement in the deck slab is provided along the........
Current direction
4 choice options
97. The weight of stone to be used for apron for raft Foundation shall not be less than
40 kg
4 choice options
98. G.A.D. Stands for
General arrangement Drawing
4 choice options
99. Silt factor is used to calculate
Scour Depth
4 choice options
100. In moderate condition concrete cover to reinforcement in foundation pile etc is
75 mm
4 choice options