R,B & B 1 To 100

1. Shape of "STOP" Regulatory (Mandatory) sign is...........

2. Minimum grade of concrete for RCC for bridge of length less than 60 m in moderate condition is............

3. Weight in kg/m of reinforce bar of diameter "d" mm is given by formula.........

4. Height of brick Masonry of 10 layers using BIS size first class brick is.......

5. Which of the following is NOT a bond used in brick Masonry

6. Which of the following is a False statement ?

7. In which Bond every header is Centrally supported over the stretcher below it ?

8. The proportion of cement and sand used in the motor for brick Masonry is

9. Cavity wall (hollow walls) is .........

10. Thickness of brick partition wall is usually........

11. In half brick wall........... is generally provided at interval of 1.0 M vertical

12. In RCC Chhajja, main reinforcement is placed

13. Openings left in the wall for doors and windows are Bridged by.........

14. In public buildings the width of Stairs shall be minimum of..........

15. The pitch of stairs shall be limited to

16. The rise for stairs in public building is generally kept at

17. For comfort point of view the number of steps are not more than......... and not less than........

18. The clear distance between the trade and soffit of the flight immediately above shall not be less than

19. The Nosing of Treads of stair case is generally

20. Choose correct statement

21. In hospital, comfortable size (rise × tread) of the step is....

22. Which of the following is NOT a turning stair

23. A dog legged Stairs is a type of

24. A Stair, having wider flight at the bottom and turning narrow flights, one left and other right at landing is called.....

25. When there are space limitations, the stairs used are......

26. In RCC stair with slab spanning longitudinally main reinforcement........

27. Which of the following is NOT a function of landing provided in the stairs

28. Choose correct option related to continuous stairs......

29. Lean to roof is suitable for maximum span of

30. For Bathrooms and WC of residential buildings....... are generally used

31. In public buildings the minimum area of Windows should be...........% of floor area

32. The width of internal door for a residential building shall be

33. The width of the Door should be such that

34. The solid substance in a form of fine powder, forming the bulk of a paint is called

35. The use of vehicle or career in a paint is

36. D.P.C in building stands for

37. Expansion joint in R.C.C framed structure in a building is required where length is more than

38. The unit of measurement of pointing is

39. Sand Faced plaster is generally applied on

40. The rates of various items in the DSR shall be increased by......... while framing estimate of a building in Central Jail area located in corporation area

41. The unit of measurement of general pest control service to the building to control nuisance of insects is........

42. The quantity of water required per bag of cement to prepare a concrete having W-C ratio = 0.6 is

43. What is maximum permissible silt content in sand used for concrete

44. Water requirement for domestic purpose is

45. Horizontal projections of the head and sill of frame to fix frame on the wall openings is called as

46. Which of the following door has "drum"

47. A door which provided entrance to one and exist to the other person simultaneously and closes automatically when not in use is.......

48. Anti- termite treatment can be divided into two categories

49. As per IS. 456/2000 concrete of grade........ and above upto grade........ are called standard concrete

50. In a slump test each layer of concrete is temped with........ strokes of the rounded end of the tamping rod.

51. In septic Tank......

52. In Maharashtra, road development plan now in force is......

53. IRC stand for........

54. Arrange stages of Engineering Surveys in Chronological order

55. A terrain is classified as plain rolling etc. based on.......

56. Capacity of two Lane Road (7.0 M carriageway) is

57. In plain terrain , Design speed of SH is........ and for NH is.......

58. Rulling Gradient is

59. One and half Lane Road has carriageway width of

60. Rate of spraying of bitumen for tack coat on BT surface is........

61. Super elevation is provided

62. Superelevation shall not be more than........ in plain terrain and not more than........ in hilly terrain

63. In highway Geometric design SSD means......

64. IRC has specified following formula to calculate superelevation

65. Vertical curves are introduced......

66. Types of vertical curves are......

67. "Speed limit" sign is an example of...

68. The violation of........... is a legal offence.

69. Which sign board will you install well before the start of left turn on a road

70. Center line is Mark on road....

71. Which of the following is NOT a test for road aggregate

72. Choose correct pair

73. Which test is carried on Bituminous mix ?

74. To know the limiting value of temperature, beyond which bitumen should not be heated,......... test is conducted.

75. For design of Bituminous mixes.......... is used

76. Stability of bituminous mix........

77. The temperature of BM mix while laying shall be....... as per MORTH specifications

78. C.B.R method is used for.........

79. As per IRC recommendations for CBR method of design, Lane distribution factor for two Lane single carriageway road is.

80. As per IRC recommendations for CBR method of design, traffic growth rate may be consider as.......... if data not available

81. As per IRC recommendations, per day number of............ is considered for Pavement design by CBR method

82. The CBR Method of Pavement Design Gives

83. The Design CBR for pavement design shall be

84. Which of the following pavement composition is recommended if total pavement thickness required is 575 mm for a CBR 5% ?

85. Which of the following is an example of rigid Pavements ?

86. What is the true for Dowel Bars in CC pavement ?

87. In CC Pavement tie bars are provided........

88. For compaction of clay soils....... are used.

89. In construction of WBM road, rolling

90. In construction of WBM roads, rolling

91. In construction of WBM road lateral confinement in from of shoulder......

92. Soil stabilization is done to

93. Before filling, pot holes are.....

94. The first priority of road maintenance is.....

95. Excess bitumen in surface bleeds and surface becomes patchy and slippery the remedial measure in

96. For a bitumen hungry surface of road

97. For maintenance of wbm road

98. Benkelman beam method is used....

99. Catch water drains are provided......

100. Drainage of rain water is important for road......