R,B & B 101 To 200

1. Job mix design refers to

2. Crush metal of 25 mm size shall pass 100% through......... square mesh and 100% retain on............ square mesh

3. Riding return is cast Monolithic with.......

4. Raft foundation for Bridge is suitable where.........

5. A bridge which never gets over overtopped during flood is

6. For solid slab Bridge upto span of 10 M,........... is used

7. For flyovers and ROB,......... is used as parapet

8. For Bridge with raft Foundation, raft slab is underlain by.........

9. Width of raft slab is kept equal to

10. Clear carriageway width of three Lane Bridge is

11. RCC wearing course is provided on deck of........

12. For bridge of height 8 M, with hard Strata at Shallow depth which type of Return is used ?

13. Sand is filled in box return because

14. Which of the following is NOT provided for submersible Bridges

15. The foundation of pier/ abutment of bridge shall be keyed into the hard rock by

16. In inglis formula for calculation of discharge if C = 7000 and A is catchment area is sq. Mile discharge is given in

17. O.F.L in Bridge engineering stand for

18. Softfit of highlevel river Bridge is calculated as softfit level =

19. % obstruction in highlevel Bridge is generally limited to

20. Expansion joint used for tee Girder bridges with span more than 10 m but less than 30 M is

21. In raft Foundation, apron and apron wall are provided.

22. Weep holes in abutment and retaining walls are provided

23. In a normal tee Girder Bridge, main reinforcement in the deck slab is provided along the......

24. The weight of stone to be used for apron for Raft Foundation shall not be less than

25. G.A.D. Stands For

26. Silt factor is used to calculate

27. In moderate condition concrete cover to reinforcement in foundation pile etc is

28. The piers are oriented along the current direction.........

29. The minimum vertical clearance required in the vehicular underpass with heavy traffic is

30. The economical span to height ratio for Bridge with open Foundation is

31. R.E. wall stands For

32. R.E. walls are used for approaches of

33. Which of the following are traffic control device ? 1. Signs. 2. Signals. 3. Road Markings. 4. Islands

34. 'BBM' stand for, 1. Bitumen Bound Macadam 2. Burnt Brick Masonry 3. Bridge Bench Mark 4. Bitumen Built Macadam

35. 'MSA' Stand for. 1. Material at Site Account 2. Maximum Size of Aggregates 3. Million Standard Axles 4. Mean Size of Aggregates

36. Which of the followings are TRUE statements ? 1. Non- Load bearing walls carry their own weight only 2. Load bearing walls carry their own weight 3. Non load bearing walls carry superimposed loads 4. Load bearing walls carry superimposed loads.

37. The methods of soil stabilizations are....... 1. Mechanical soil stabilization 2. Soil lime stabilization 3. Soil bitumen stabilization 4. Soil concrete stabilization

38. Calculate spacing of T-8 bars required to be provided for surface reinforcement of 5 kg/ sq.m equally divided in both direction. (Rounded to Multiple of 10 )

39. Volume of wall type pier with all- round batter is calculated correctly by

40. Which of the following statements about period of removal of formwork are true ? 1. Vertical sides of slabs, beam, columns and walls............ 24- 48 hours 2. Slab soffit ( with props left)..........3 Days 3. Props of Slab (span upto 4.5 m)........7 Days 4. Props of Slab (Span > 4.5 m ) ..........14 Days

41. Which of the following lists all components of the WELL FOUNDATION

42. Calculate volume of wall type pier with half round cut and ease water, straight length = 7.5 m, Width = 1.00 m Without Batter, Height = 10 m

43. Shape of cautionary (warning) sign is........

44. Minimum grade of concrete for RCC for bridges of length less than 60 m in moderate condition is.........

45. Weight in kg/m of Reinforce bar of diameter 12 mm is.........

46. Height of brick Masonry of 10 layers using BIS size first class brick is.......

47. Which of the following is a type of Bond used in brick Masonry

48. In which bond of brick Masonry, each course is comprised of alternate headers and stretcher ?

49. In which Bond every header is Centrally supported over the stretcher below it ?

50. The proportion of cement and sand used in the mortor for brick Masonry is.

51. Select FALSE statement about cavity wall.

52. Thickness of brick partition wall is usually......

53. In half brick wall............. is generally provided at interval of 1.0 M (vertical)

54. In RCC lintel, main reinforcement is placed

55. Lintels are provided

56. In residential buildings, the width of Stairs shall be minimum of.......

57. The pitch of stairs shall be limited to

58. The Rise of stairs in public building is generally kept at

59. For comfort point of view, the number of steps in one flight are not more than........ and not less than 3.

60. The clear distance between the tread and soffit of the flight immediately above it is called as...

61. The noising of treads of stair case is generally

62. Choose correct statement

63. In hospital, comfortable size (Rise × Tread ) of the steps is

64. Which of the following is NOT a turning stairs

65. A dog legged stairs is a type of

66. Bricks when shocked in water, shall not absorb water more than

67. Nominal mix concrete........... is equivalent to concrete of grade of M-15

68. Give reason : the distance between the hot mix plant and actual site of work is restricted to be less than certain limit say 30 kms

69. Which of the following is NOT a function of Landing provided in the stairs.

70. Choose correct option related to continuous stairs.....

71. Lean to roof is suitable for maximum span of

72. For bathrooms and WC of residential buildings,............ are generally used

73. In public buildings, the minimum area of Windows should be...........% of floor area

74. The width of internal door for a residential building Shall be

75. Terpentine is

76. The commonly used Paints for doors, Windows, metal grills

77. D.P.C. in a Building Stands for

78. Expansion joint in RCC frame structure in a building is required where length is more than

79. The unit of measurement of painting is

80. Sand faced plaster is generally applied on

81. The rates of various items in a DSR shall be increased by......... while framing estimate of a building in Central Jail area located in corporation area.

82. The unit of measurement of general pest control services to the building to control nuisance of insects is..........

83. The quantity of water required per bag of cement to prepare a concrete having WC ratio = 0.6 is

84. What is maximum permissible silt content in sand used for concrete

85. Water requirement for domestic purpose is

86. To fix or to hold the door frame to opening,.......... is used

87. For garages, godowns, shops Fronts the door commonly used is

88. A door which provided entrance to one and exist to the other person simultaneously and closes automatically when not in use, is........

89. Anti -termite treatment can be divided into two categories

90. As per IS. 456/ 2000 concrete of grade....... and above upto grade....... are called standard concrete.

91. In a slump test each layer of concrete is temped with....... strokes of the rounded end of the tamping rod.

92. In septic tank........

93. In Maharashtra, road development plan, now in force is.....

94. "IRC" stands for.....

95. Arrange stage of Engineering service in chronological order

96. A Terrain is classified as plain, rolling etc. based on......

97. Capacity of two Lane Road (7.0 M carriageway) is

98. In plain Terrain, design speed for SH is.......... and for NH is.......

99. Rulling gradient is....

100. One Lane Road has Carriageway width of......